1. <sub id="1115r"><sup id="1115r"></sup></sub>
    <span id="1115r"><output id="1115r"></output></span>

    <track id="1115r"><i id="1115r"></i></track>

    <legend id="1115r"><i id="1115r"></i></legend>
  2. <optgroup id="1115r"><li id="1115r"><del id="1115r"></del></li></optgroup>
    A Nitrogen Oxide Ion Selective Electrode sensor specifically designed to measure 0.2 ppm to 220 ppm (5x10-6 M to 5x10-3 M) concentrations of NOx. Applications include, but not limited to: Air, Stack Gases.
    Model
    Specifications
    CS6212NO2 CS6512NO2 CS6712NO2 ( NOx ) A Nitrogen Oxide Ion Selective Electrode sensor
    Lab Process Process Slope 56 ± 3 mV between 10-100 ppm @ 25°C
      PG13.5 NPT 3/4" Reproducibility ± 2%
    CS6210NO3 A Nitrogen Oxide Ion Selective Electrode sensor CS6510NO3 A Nitrogen Oxide Ion Selective Electrode sensor CS6710NO3 A Nitrogen Oxide Ion Selective Electrode sensor Interferences SO2, HF, acetic acid
    Temp. Range 0 to 50° C (if calibrated at that temp.)
    Pressure Range 0 to 10 psi
    Response Time 95% response in 30 seconds
    Storage Long term, store dry;Short term, store in nitrogen oxide standard with ISA added
    Concentration Range 0.2 ppm to 220 ppm
    ?(5 x 10-6 M to 5 x 10-3?M)
    pH Range 1.1 to 1.7 pH
    Resistance 1000 to 1500 megaohms
    Care, Maintenance & Cleaning Treat with a dilute nitrogen oxide standard with pH adjusted to 1.1 - 1.7 Replace membrane as needed
    Isopotential Point Unknown
    On-Line Capability Yes, pH control required
    Applications Air, Stack Gases
    Site Meter 亚洲全国最大的色惰网-一本大道香蕉大a√在线-亚洲三级片-综合图区欧洲偷自拍