1. <sub id="1115r"><sup id="1115r"></sup></sub>
    <span id="1115r"><output id="1115r"></output></span>

    <track id="1115r"><i id="1115r"></i></track>

    <legend id="1115r"><i id="1115r"></i></legend>
  2. <optgroup id="1115r"><li id="1115r"><del id="1115r"></del></li></optgroup>
    CON30 Tester
    Conductivity/TDS/Salinity/TEMP Tester
    CLEAN CON30 Tester
    Conductivity / TDS / Salinity Tester
    CON30 is the best value salt meter in your pocket, with 4 parameters (Conductivity / TDS / Salinity tester) in one and easy calibration. This dip-style tester is ideal for spot checking with greater flexibility.
    Waterproof, Dustproof Housing - IP67 rated.
    Broad measuring range: 0.0 S/cm -20.00mS/cm,from pure water to waste water applications.
    Large LCD with backlight.
    4 parameters in one meter, simple calibration.
    1*1.5 AAA long battery life.
    Self-Diagnostic for easy troubleshooting (e.g. battery indicator, message codes)
    Auto Lock Function
    Floats on water
    Pure water Boiler water Waste water Lab
    Pure water Boiler water Waste water Lab
    Range 0.0 μS/cm (ppm) - 20.00 mS/cm (ppt)
    Resolution 0.1 μS/cm (ppm) - 0.01 mS/cm (ppt)
    Accuracy ±1% F.S.
    Temp. Range 0 - 100.0 °C / 32 - 212 °F
    Working Temperature 0 - 60.0 °C / 32 - 140 °F
    Temp. Compensation Range 0.0 - 60.0 °C
    Temp. Compensation Type Auto/Manual
    Solution Temp. Coefficient 0.00 - 10.00% (default 2.00%)
    Reference Temp. 15.0 - 30.0°C (default 25 °C)
    Calibration Any 1 Point Calibration
    TDS Range(Coefficient:0.5) 0.0 mg/L (ppm) - 20.00 g/L (ppt)
    TDS Coefficient 0.40 - 1.00 Adjustable (Coefficient:0.5)
    Salinity Range 0.0 mg/L (ppm) - 13.00 g/L (ppt)
    Salinity Coefficient 0.65
    Probe CS3931 Graphite , K=1.0
    Auto backlight off 1 minute
    Auto power off 5 minutes without key be pressed
    Power 1x1.5V AAA battery
    Dimensions (H×W×D) 185×40×48 mm
    Weight 95g
    Protection IP67
    Site Meter 亚洲全国最大的色惰网-一本大道香蕉大a√在线-亚洲三级片-综合图区欧洲偷自拍